Twin Fish Industries Revolution

• BT40-45° internal thread tool gripper• BT40 spindle gripper 9105-03• Model BRIGHT BT40-OTT-45°• BT40 spindle pull claw• BT40-45 ° pull claw with inner screw• BT40 internal teeth tool stud gripper•Taiwan original BRIGHT BT40 pull claw• OTT BT40-45° pull stud clampingBT50-45° external thread gripper• BRIGHT BT50 tool gripper• MAS BT50 gripper• BT50 tool stud gripper• BT50 pull claw• BT50-45° H spindle grippers• Gripper BT50 for pull rod assyBT30 External Thread Pull Stud Grippers for BT Series ATC Spindle • BT30-45° external thread gripper• BRIGHT  BT30 tool gripper• MAS BT30 gripper• BT30 tool stud gripper• BT30 pull claw• BT30-45°H spindle grippers• Gripper BT30

Metering injectors are meant to eject metered amount of oil to the lubrication points. One metering injector is required for one lubrication point. 

Operates as soon as pressure builds up in lubrication line. Get recharged for the next cycle as soon as the pressure in lubrication line drops when the pump is off. Metering injectors are meant to eject metered amount of oil to the lubrication points. One metering injector is required for one lubrication point. 

Operates as soon as pressure builds up in lubrication line. Get recharged for the next cycle as soon as the pressure in lubrication line drops when the pump is off. 
View Less Details

Disc Springs are conically-shaped, washer-type components designed to be axially loaded. What makes Disc Springs unique is that based on the standardized calculations of DIN EN 16984 (formerly DIN 2092), the deflection for a given load is predictable and the minimum life cycle can be determined.

A limit switch is an electromechanical device operated by a physical force applied to it by an object. Limit switches are used to detect the presence or absence of an object. These switches were originally used to define the limit of travel of an object, and as a result, they were named Limit Switch.

Lithium ,Panasonic batteryA Fanuc Drive Battery is a 6V lithium battery, like the BR-2/3AGCT4A, used in Fanuc CNC systems, industrial robots, and servo amplifiers. Its primary function is to maintain the backup power for the system's volatile memory when the main power is off, ensuring that critical data like machine parameters and program settings are retained. This prevents data loss and the need to reprogram the system after a power cycle or failure. 

The ATC arm comes to this position and picks up the tool. The arm swivels between the machine turret and the magazine. It will have one gripper on each of the two sides. Each gripper can rotate 90°, to deliver tools to the front face of the turret.

On some Fanuc CNCs, the fan is a replaceable module, while on others it's not. Here's some information about Fanuc fanCnc machine control unit cooling fans

Available and suitable for Atc arm BT40 and BT50 Ams BFW  all important VMC and HMC.